AXP-140

[:en]
FAQ 1
Question : A lot of motherboards of today have their own heatpipe cooling system running across the board. Some of them are really tall. How can I be sure that the AXP-140 will fit?
Answer : Current highest heatpipe cooling system is no higher than 37mm. There is a distance of 40mm from the bottom of the base to the first fin from the bottom, therefore it is safe to say that at long as you have at least 40mm of clearance, motherboards that incorporate the heatpipe cooling system will have room to work with AXP-140
FAQ 2
Question : Would AXP-140 be able to fit in my mid tower case?
Answer : Basically, for mid tower cases there are two types of formats to determine compatibility with AXP-140. You will first need to confirm that your case has a width of 110mm or above. Next, locate your PSU (Power Supply unit). If your PSU is located right above the motherboard without overlapping, you’re ok to install AXP-140. If your PSU is located at the bottom then you would not be able to install AXP-140. Please refer to illustration.
FAQ 3
Question : I have a micro-ATX motherboard. Would I have a problem installing the AXP-140? What about my video card? Would I have room left for it if AXP-140 is installed?
Answer : When putting forth the design for AXP-140, HTPC audience was our primary goal. Micro-ATX motherboards are definitely included in our plan. You would not have spacing problem with AXP-140.

[:tw]
常見問題 1
問：當今很多主板擁有自己的熱管散熱系統正常運轉。其中有些是很高。我怎麼能肯定AXP-140適合安裝？
答：當今最高的熱管散熱系統不高於37毫米。AXP-140從底座到第一鰭片底部的距離還有40mm，主板結合熱管散熱系統，至少有40毫米間隙，將可以安全安裝。
常見問題 2
問：請問AXP-140能適合我的中塔機箱嗎？
回答：中塔與AXP-140兼容基本上有兩種方法可以確定。首先您需要確​​認您的機箱有110mm或以上的寬度。接下來，找到您的電源（電源單元）。如果您的電源位於不重疊的主板上面，確定可以安裝AXP-140。如果您的電源位於底部將無法安裝AXP-140。請參閱圖。
常見問題 3
問：我有一個Micro-ATX主板。我安裝AXP-140會有問題嗎？我的顯卡會怎樣？如果安裝AXP-140我會有其它空間嗎？
答：當在設計AXP-140，HTPC觀眾是我們的首要目標。Micro-ATX主板肯定是包含在我們的計劃。與AXP-140您不會有任何空間問題。

[:cn]
常见问题 1
问：当今很多主板拥有自己的热管散热系统正常运转。其中有些是很高。我怎么能肯定AXP-140适合安装？
答：当今最高的热管散热系统不高于37毫米。AXP-140从底座到第一鳍片底部的距离还有40mm，主板结合热管散热系统，至少有40毫米间隙，将可以安全安装。
常见问题 2
问：请问AXP-140能适合我的中塔机箱吗？
回答：中塔与AXP-140兼容基本上有两种方法可以确定。首先您需要确​​认您的机箱有110mm或以上的宽度。接下来，找到您的电源（电源单元）。如果您的电源位于不重叠的主板上面，确定可以安装AXP-140。如果您的电源位于底部将无法安装AXP-140。请参阅图。
常见问题 3
问：我有一个Micro-ATX主板。我安装AXP-140会有问题吗？我的显卡会怎样？如果安装AXP-140我会有其它空间吗？
答：当在设计AXP-140，HTPC观众是我们的首要目标。Micro-ATX主板肯定是包含在我们的计划。与AXP-140您不会有任何空间问题。